BFHSD Bi-Metal Screw Timber-to-Steel (Collated & Loose)
Model: BFHSD
{{ levelLabels[lvl] }}:
| {{ stock.company }} | Qty: {{ stock.total_quantity }} |
The BFHSD Bi-Metal screw is designed for Timber-to-Steel joist (1.2mm–2.4mm steel thickness) applications. The winged design cuts a clearance hole and avoids sheet ride. The Bi-Metal design consists of 316 Stainless Steel and a Carbon Steel tip which is perfect for steel joist applications without compromising on corrosion resistance. This screw is available for both hand-drive and collated Quik Drive® system.
Material
316 Stainless Steel
Features & Benefits
- Drill Point with wings drives easily through 1.2mm–2.4mm steel without pre-drilling
- Ribbed Flat Head for countersink finish
- Winged design avoids sheet ride
- Zinc coating to avoid dissimilar metal corrosion
- 316 Stainless Steel for severe corrosion resistance
Applications
- Timber-to-Steel Decking
- Steel Frame Applications
- This screw is available for both hand-drive and collated Quik Drive® system
Model No. Table
Specifications - Hand-drive
|
Model No. |
Size |
Thread |
Point |
Material & Finish |
Box Qty |
Drive Size |
Replacement Bit |
|
SSBFHSD2R250 |
10G x 50mm |
16TPI |
Drill Point |
316 Stainless Steel |
250 |
#2 Square Drive |
BIT2S-2-RC3 |
|
SSBFHSD2R40 |
40 |
Specifications - Collated for Quik Drive®
|
Model No. |
Size |
Thread |
Point |
Material & Finish |
Box Qty |
Drive Size |
Replacement Bit |
|
SSBFHSD2SA |
10G x 50mm |
16TPI |
Drill Point |
316 Stainless Steel |
1000 |
#2 Square Drive |
BIT2S-RC10 |
|
SSBFHSD2SA-R600 |
600 |
PLEASE NOTE: Pre-drilling and countersink may be necessary at ends, butt joints, and on applications where denser material is used. Follow the board manufacturer's recommendation where applicable. WARNINGS: Always wear PPE during installation. Corrosive environments, exposure to water, salt air, or chemicals (including some wood preservatives) may cause early failure. Click here for Corrosion Information, Important Information & General Notes.
Here is the brand introduction content...
Here are the parts content...