CNA Ring-Shank Connector Nail
Model: CNA
{{ levelLabels[lvl] }}:
| {{ stock.company }} | Qty: {{ stock.total_quantity }} |
CNA Ring-Shank Connector Nail is tested and approved for use with Simpson Strong-Tie joist hangers, brackets, straps and nail plates.
Material & Finish
- CNA4.0X50 CNA4.0X60: Carbon Steel
- CNA4.0X60S: 304 Stainless Steel
Features & Benefits
- Use to install selected Simpson Strong-Tie connectors for CLT & Engineered Wood products
- Annular Threads or "rings" on the shank increase withdrawal capacity
- Carbon steel for interior applications only
- Grade 304 Stainless Steel for exterior applications and corrosive environments
Applications
- Cross-Laminated Timber (CLT)
- Laminated Veneer Lumber (LVL)
- Glued Laminated Timber (Glulam)
- Engineered Wood Products (EWP)
Model No. Table
|
Item Size |
Lateral Flat,RK/Material Thickness |
Axial |
|||
|
1.2mm |
1.5 to 2.0mm |
2.5 to 4.0mm |
|||
|
Carbon Steel |
CNA4.0X50 |
2.23 |
2.23 |
2.23 |
1.01 |
|
Carbon Steel |
CNA4.0X60 |
- |
- |
- |
- |
|
S/S |
CNA4.0X60S |
2.38 |
2.38 |
2.38 |
1.25 |
These coated fasteners possess a level of corrosion resistance that makes them suitable for use in some exterior and corrosive environments and with some preservative-treated timber. For applications in higher-exposure applications, consider Type-300 series stainless-steel fasteners for superior corrosion resistance. Bit(s) included with every box of screws.
Pre-drilling and countersink may be necessary at ends, butt joints, and on applications where denser material is used. Follow board manufacturers recommendations where applicable.
Here is the brand introduction content...
Here are the parts content...