Hitools

CSA Connector Screw Loose

Model: CSA_Loose

{{ formattedPrice }} inc. GST ~~{{ productData.list_price }}~~

Qty: {{ stock.total_quantity }}

SKU: {{ sku }}

UOM Qty: {{ uomQty }}

Quantity:

{{ quantity }} exceeds {{ totalQuantity }} in stock – will be backordered 这里要加backorder时长从产品数据内取.

The CSA is a self-drilling Flat Head screw with a Type-17 Point tip suitable for installing construction connectors to timber structures.

The CSA connector screw is developed for installing Simpson Strong-Tie connectors to timber, in order to obtain the published load bearing capacities. The conical shape under the head ensures a full contact with the connector which increases the transfer of force. A fixed connection with larger cross-bearing capacity than for standard screws is obtained. The 6 lobe recess helps to fix the screw during insertion.

Material & Finish

316 Stainless Steel: CSA5.0X40S
Electro Galvanised: CSA5.0X40 CSA5.0X50 CSA5.0X40T CSA5.0X50T

Features & Benefits

Deep 6-Lobe recess provides improved control and greated bit life
Reinforced head for secure fit in connector holes
Type 17 point to prevent splitting of timber
Available in 316 Stainless Steel for exterior applications and corrosive environments

Applications

Fixing connectors to timber
CLT, LVL, Glulam, Mass Timber Applications

Approvals

ETA approved (ETA-04/0013)

Model No. Table

Specifications - Hand-drive Loose

Model No.	Size (mm)	Point	Material & Finish	Box Qty	Drive Size	Replacement Bit
CSA5.0X40	5 x 40	Type-17	Carbon Steel, Electro Galvanised	250	T-20, 6-lobe	BIT20T-2-R2
CSA5.0X50	5 x 50		Carbon Steel, Electro Galvanised
CSA5.0X40S	5 x 40		316 Stainless Steel

Specifications - Quik Drive^® Collated

Model No.	Size (mm)	Point	Material & Finish	Qty per Strip	Box Qty	Drive Size	Replacement Bit
CSA5.0X40T	5 x 40	Type-17	Carbon Steel, Electro Galvanised	25	1,500	T-20, 6-lobe	BITLTX20E-RC10

PLEASE NOTE:

Type 316 stainless steel provides a level of corrosion protection suitable for severe environments, especially environments with chlorides. Bit(s) included with every box of screws.

Pre-drilling and countersink may be necessary at ends, butt joints, and on applications where denser material is used. Follow the board manufacturer's recommendation where applicable. WARNINGS: Always wear PPE during installation. Corrosive environments, exposure to water, salt air, or chemicals (including some wood preservatives) may cause early failure. Click here for Corrosion Information, Important Information & General Notes.

Here is the brand introduction content...