DSD HARDWOOD Decking Screw (Collated & Loose)
Model: DSD
{{ levelLabels[lvl] }}:
| {{ stock.company }} | Qty: {{ stock.total_quantity }} |
The DSD hardwood decking screw has been developed to install without the need to pre‑drill boards. With toughened 316 stainless steel and coarse threads, it will fasten most species of hardwood. A clean cutting head with a great look, rounds off the Ultimate Decking Screw.
Material & Finish
- 316 Stainless Steel
Features & Benefits
- Low torque design for fast and easy driving.
- Broad head with nibs provides a greater clamping force and allows for a cleaner decorative finish.
- T-25 and T-30 6 Lobe recess provides a positive drive system, and attractive finish.
- A large countersunk head that holds the board firm, with nibs to help it embed cleanly and look aesthetically pleasing.
- A knurl or nib on the shank to allow for a clearance hole as the screw is installed, reducing driving torque and improving clamping force.
- For corrosion as well as ductility to allow hardwood timbers to move as they expand and contract.
- A drill point that will cut through the toughest of Hardwood timber with little chance of splitting, saving significant time for the builder.
Applications
- For timber and hardwood decking to timber joist
- This screw is available loose for hand-drive and collated for Quik Drive® systems
Model No. Table
Specifications - Hand-drive
|
Model No. |
Size |
Thread |
Point |
Material & Finish |
Box Qty |
Drive Size |
Replacement Bit |
|
SSDSD50R250 |
12G x 50mm |
Coarse Threads |
Hardwood Drill Point |
316 Stainless Steel |
250 |
T-25, 6-lobe |
BIT25T-2-RC3 |
|
SSDSD50R1100 |
1100 |
||||||
|
SSDSD65R250 |
12G x 65mm |
250 |
|||||
|
SSDSD65R1100 |
1100 |
||||||
|
SSDSD1475R150 |
14G x 75mm |
150 |
T-30, 6-lobe |
BIT30T-2-RC3 |
|||
|
SSDSD1475R400 |
400 |
||||||
|
SSDSD14100R150 |
14G x 100mm |
150 |
|||||
|
SSDSD14100R400 |
400 |
Specifications - Quik Drive® Collated
|
Model No. |
Size |
Thread |
Point |
Material & Finish |
Box Qty |
Drive Size |
Replacement Bit |
|
SSDSD50SA |
12G x 50mm |
Coarse Threads |
Hardwood Drill Point |
316 Stainless Steel |
1000 |
T-25, 6-lobe |
BITTX25-RC10 |
|
SSDSD65SA |
12G x 65mm |
PLEASE NOTE:
Type 316 stainless steel provides a level of corrosion protection suitable for severe environments, especially environments with chlorides. Bit(s) included with every box of screws.
Pre-drilling and countersink may be necessary at ends, butt joints, and on applications where denser material is used. Follow the board manufacturer's recommendation where applicable. WARNINGS: Always wear PPE during installation. Corrosive environments, exposure to water, salt air, or chemicals (including some wood preservatives) may cause early failure. Click here for Corrosion Information, Important Information & General Notes.
Here is the brand introduction content...
Here are the parts content...