Hitools

DSV SOFTWOOD Screw (Collated & Loose)

Model: DSV

{{ formattedPrice }} inc. GST ~~{{ productData.list_price }}~~

Qty: {{ stock.total_quantity }}

SKU: {{ sku }}

UOM Qty: {{ uomQty }}

Quantity:

{{ quantity }} exceeds {{ totalQuantity }} in stock – will be backordered 这里要加backorder时长从产品数据内取.

The Deck-Drive™ DSV Softwood-to-Softwood screw is a powerful fastening solution for preservative-treated decking applications. With its Rimmed Flat Head with Nibs and Sharp Point, the DSV is ideally suited to be driven and countersunk into today's timber deck boards. The shank is designed to withstand the swelling and shrinkage that is common with fast-growth timber. This screw is available for both hand-drive and collated Quik Drive^® system.

Material

Carbon Steel

Finish

Quik Guard^® Coating

Features & Benefits

Rimmed Flat Head with Nibs countersinks easily
High-low threads with Type-17 point easily pierces softwood deck boards.
Low-torque, special upper thread design increases deck board pulldown
Quik Guard^® coating provides corrosion resistance for exterior and certain preservative-treated timber applications
Tan colour blends in with most timber

Applications

For timber and softwood decking to timber joist
This screw is available loose for hand-drive and collated for Quik Drive^® systems

Decking Calculator

Model No. Table

Specifications - Hand-drive

Model No.	Size	Thread	Point	Material & Finish	Box Qty	Drive Size	Replacement Bit
DSVT2R250	10G x 50mm	Variable Thread Design	Type-17 with high-low threads	Carbon Steel Quik Guard^® Coating	250	T-25, 6-lobe	BIT25T-2-RC3
DSVT212R250	10G x 65mm	Variable Thread Design	Type-17 with high-low threads	Carbon Steel Quik Guard^® Coating	250	T-25, 6-lobe	BIT25T-2-RC3

Specifications - Collated for Quik Drive^®

Model No.	Size	Thread	Point	Material & Finish	Box Qty	Drive Size	Replacement Bit
These coated fasteners possess a level of corrosion resistance that makes them suitable for use in some exterior and corrosive environments and with some preservative-treated timber. For applications in higher-exposure applications, consider Type-300 series stainless-steel fasteners for superior corrosion resistance. Bit(s) included with every box of screws. Pre-drilling and countersink may be necessary at ends, butt joints, and on applications where denser material is used. Follow board manufacturers recommendations where applicable.
DSVT2S-R600	10G x 50mm	Variable Thread Design	Type-17 with high-low threads	Carbon Steel Quik Guard^® Coating	600	T-25, 6-lobe	BITTX25-RC10
DSVT2S	10G x 50mm				1,500
DSVT212S	10G x 65mm				1,000
DSVT3S	10G x 75mm				1,000

PLEASE NOTE: Pre-drilling and countersink may be necessary at ends, butt joints, and on applications where denser material is used. Follow the board manufacturer's recommendation where applicable. WARNINGS: Always wear PPE during installation. Corrosive environments, exposure to water, salt air, or chemicals (including some wood preservatives) may cause early failure. Click here for Corrosion Information, Important Information & General Notes.

Here is the brand introduction content...