DWP Softwood & Hardwood Screw (Loose)
Model: DWP
{{ levelLabels[lvl] }}:
| {{ stock.company }} | Qty: {{ stock.total_quantity }} |
The DWP Softwood & Hardwood Screw is a powerful fastening solution for decking and general exterior applications where extra corrosion protection is needed. With its specially designed sharp‑point and unique box‑threads, the DWP is ideally suited for the majority of timber used in today’s decking boards.
Material
S Series: 305 Stainless Steel
T Series: 316 Stainless Steel
Features & Benefits
- Unique "box" threads with raised-ridge technology greatly reduces driving torque, which allows you to drive more screws on a single battery charge
- 305 Stainless Steel where extra corrosion protection is required, ideal for outdoor exposure and wet service environments
- 316 Stainless Steel for more corrosive environments such as coastal areas
- Specially-designed sharp point penetrates softwood timber products with ease
- 6-lobe drive helps prevent driver-bit cam-out, resulting in easier driving and longer bit life
Applications
- For Softwood or Hardwood decking (up to 30mm thick) to timber joist
- Softwood: No Pre-drill or Countersink required
- Hardwood: Pre-drill and Countersink required
- Docks, Boardwalks, Wharf, Jetty, Marina
- Timber Construction
Model No. Table
|
Model No. |
Size |
Thread |
Point |
Material & Finish |
Box Qty |
Drive Size |
Replacement Bit |
|
S10200WPR250 |
10G x 50mm |
Box Threads |
Sharp Point with Nibs |
305 Stainless Steel |
250 |
T-25, 6-lobe |
BIT25T-2-RC3 |
|
S10200WPR1100 |
1100 |
||||||
|
S10250WPR250 |
10G x 65mm |
250 |
|||||
|
S10250WPR1100 |
1100 |
||||||
|
T10300WPR250 |
10G x 75mm |
316 Stainless Steel |
250 |
||||
|
T10300WPR1100 |
1100 |
||||||
|
T14300WPR250 |
14G x 75mm |
250 |
T-27, 6-lobe |
BIT27T-2-RC3 |
|||
|
T14400WPR250 |
14G x 100mm |
250 |
PLEASE NOTE: Pre-drilling and countersink may be necessary at ends, butt joints, and on applications where denser material is used. Follow the board manufacturer's recommendation where applicable. WARNINGS: Always wear PPE during installation. Corrosive environments, exposure to water, salt air, or chemicals (including some wood preservatives) may cause early failure. Click here for Corrosion Information, Important Information & General Notes.
Here is the brand introduction content...
Here are the parts content...