Hitools

FREP Joist Hanger

Model: FREP

{{ formattedPrice }} inc. GST ~~{{ productData.list_price }}~~

Qty: {{ stock.total_quantity }}

SKU: {{ sku }}

UOM Qty: {{ uomQty }}

Quantity:

{{ quantity }} exceeds {{ totalQuantity }} in stock – will be backordered 这里要加backorder时长从产品数据内取.

FREP (Fibre Reinforced Engineered Polymer) Joist Hangers are corrosion-proof hangers which makes them an affordable alternative to stainless steel and is perfect for outdoor corrosive environments. FREP Joist Hangers can be face mounted to suit 45mm wide joists, 90-190mm deep.

Durability
UV-A FREP material has undergone 2000hr laboratory UV exposure testing compliant with ASTM D790, which includes maintaining a temperature of 60°C and high humidity. FREP Product Installed in an outdoor structure - limited warranty 25 years.

Load Bearing

All load bearing tests have been done by an independent, accredited testing body to Australian Standards AS1649 and AS1720.

Joist Span Requirements

Timber span tables should be read in conjunction with timber manufacturer/supplier span and joist tables to ensure the correct size and grade of joist you use is adequate for the proposed span.

Material

2mm FREP (Fibre Reinforced Engineered Polymer)

Features & Benefits

Corrosion & UV resistant and a great alternative to stainless steel
Strong and are engineered to last
No sharp edges
Easier to use than conventional joist hangers
Reinforced holes
Ventilation ridges for joist breathability
Patented design

Installation

Mark out positions of the FREP Joist Hangers on your bearer.
Attach Connector Nails (top left and right nails first). Use either loose or CCN64 collated nailer. Alternatively, use SD9 Connector Screws.
Insert Joists in FREP Joist Hangers and nail off.

Important Notes

Two joist hanger sizes available FREPJH9045 and FREPJH14045 to suit 90-120mm and 140-190mm high joists respectively
Not recommeneded for bush fire zones
Use 38mm x 3.32mm nails or SD9 screws (Stainless Steel or Hot Dipped Galvanised - Depending on application)
Use Multi-Blow Collated Connector Nail Gun such as CCN64 - Conventional nail guns may damage the joist hanger

Applications

Outdoor decking structure
Composite decking
Alternative to stainless steel joist hangers

Decking Calculator

Model No. Table

Model No.	Joist Size	Material	Timber Joint Group	Design Capacity (kN) DL + LL (Floor)
FREPJH9045	90-120mm	Fibre Reinforced Engineered Polymer (FREP)	JD3 JD4 JD5	3.2 3.2 3.0
FREPJH14045	140-190mm	Fibre Reinforced Engineered Polymer (FREP)	JD3 JD4 JD5	6.2 5.4 4.5

NOTES: Design Capacity is the lesser of the hanger material capacity and nail capacity as per NZS AS1720.1 and AS1721.1 using a Capacity Factor of ф=0.8 and k₁=0.69.

Here is the brand introduction content...