Hitools

MTHG Cement Sheet / Underlay Screw (Collated)

Model: MTHG

{{ formattedPrice }} inc. GST ~~{{ productData.list_price }}~~

Qty: {{ stock.total_quantity }}

SKU: {{ sku }}

UOM Qty: {{ uomQty }}

Quantity:

{{ quantity }} exceeds {{ totalQuantity }} in stock – will be backordered 这里要加backorder时长从产品数据内取.

The MTHG underlay screw is designed for fast and secure underlayment to subfloor and wall installations.

Unlike nails, the MTHG has an intricate thread pattern designed to prevent squeaking by holding underlayment tight to the subfloor and thus preventing pull-out.

Its compact trim-head allows for a flush surface and prevents floor coverings from settling in countersink recesses.

Material

Carbon Steel

Finish

Class 3 Mechanically Galvanised

Features & Benefits

Trim Head with Nibs for easy countersinking
High-Low Threads for secure holding down of underlayment to timber and steel frame
Sharp Point for fast starts saving time on the worksite
#2 square drive
18 TPI

Applications

Cement Sheet/Underlay to Timber and Steel
Bathroom Wall underlay
Recommended steel thickness 0.55mm–0.75mm

Model No. Table

Model No.	Size	Thread	Point	Material & Finish	Box Qty	Drive Size	Replacement Bit
These coated fasteners possess a level of corrosion resistance that makes them suitable for use in some exterior and corrosive environments and with some preservative-treated timber. For applications in higher-exposure applications, consider Type-300 series stainless-steel fasteners for superior corrosion resistance. Bit(s) included with every box of screws. Pre-drilling and countersink may be necessary at ends, butt joints, and on applications where denser material is used. Follow board manufacturers recommendations where applicable.
MTHG114SA	7G x 32mm	High-Low Threads 18 TPI	Sharp Point	Carbon Steel Class 3 Mechanically Galvanised	2500	#2 Square	BIT2S-RC10

Here is the brand introduction content...