PT-27 Powder-Actuated Tool
Model: PT-27
{{ levelLabels[lvl] }}:
| {{ stock.company }} | Qty: {{ stock.total_quantity }} |
The PT-27 is a high quality semi-automatic and fast-cycling fastening tool
Engineered for continuous use, high reliability, and low maintenance, the PT-27 tool is versatile, installing a variety of fastener types and lengths. This semi-automatic, powder-actuated tool is used for fastening single nails into both concrete and steel.
Powder Actuated Tools Operator Certification
Model No. PT-27
Base Material
- Concrete
- Steel
Specifications
- Firing Action: Semi-automatic
- Load Calibre: .27 strip loads, brown
- through red (levels 2–5)
- Length: 340 mm
- Weight: 2.32 kg
Product Includes
Tool is sold in a rugged tool box complete with:
- Operator's manual
- Spall suppressor
- Safety glasses / ear plugs
- Cleaning brushes
- Operator's exam and caution sign
Powder-Actuated Fastening Safety Principles
Powder-Actuated Fastening Safety Principles Before operating any Simpson Strong-Tie Anchor Systems® gas or powder-actuated tool, you must thoroughly read and understand the Operators Manual so that you fully understand the safety guidelines of the tool. You must be trained by an authorized instructor regarding the operation of the tool. Simpson Strong-Tie highly recommends that you read and fully understand the safety guidelines of the tool you use. You must then pass a test and receive a certified operator card to become a Certified Operator of Simpson Strong-Tie tools. The test and Operator's Manual are included with each tool kit and extra copies can be obtained by contacting Simpson Strong-Tie.
Features & Benefits
- Reliable design for peace of mind on the jobsite
- Safe to handle as tool requires compression against work surface for trigger to be actuated
- Operator comfort from cushioned grip and reduced recoil
- Sound dampening muffler for quiet operation
- Fast-cycling for quick operation
- Easy disassembly for cleaning and maintenance
Applications
- Mechanical / Electrical / Plumbing
- Timber / Residential Construction
- Framing members
- Drywall track
- Formwork
- Water proofing material and/or lathing
PAT Application Guide — General Notes
- Average pin embedment into concrete is 19–32mm.
- To determine pin length for concrete: add fixture thickness and embedment depths.
- To determine pin length for steel applications: add fixture thickness plus steel thickness plus 3mm. Getting the point to pass through steel 3 mm maximises holding strength.
- When selecting a load power level, it is recommended to make a test fastening with the lowest power level. If the powder load does not set the fastener, try the next highest load, and so on, until the fastener is properly set.
Model No. Table
|
Model No. |
Description |
Pin Sizes |
Base Material |
|
PT-27 |
Strip feed and manual cycle .27 caliber tool includes accessories and carry case. The tool is sold in a rugged tool box complete with:
|
16 – 72mm |
|
|
PT-27PK1 |
PT-27 Part Replacement Kit:
|
– |
– |
Here is the brand introduction content...
Here are the parts content...