Hitools

SCN Smooth-Shank Connector Nail Loose

Model: SCN_Loose

{{ formattedPrice }} inc. GST ~~{{ productData.list_price }}~~

Qty: {{ stock.total_quantity }}

SKU: {{ sku }}

UOM Qty: {{ uomQty }}

Quantity:

{{ quantity }} exceeds {{ totalQuantity }} in stock – will be backordered 这里要加backorder时长从产品数据内取.

Strong‑Drive^® connectors have been designed and tested with specific types of nails, which are generally referred to as Structural Connector Nails (SCN). The specified nail size, type and quantity must be installed in the correct holes of the connector or strap to achieve the published loads for the hardware. The dimensions and bending yield strength characteristics needed for nails used in Simpson Strong-Tie connectors.

The SCN Smooth-Shank Connector Nail has been developed as the optimum nail for connector products. It is the best choice for achieving maximum load values in Simpson Strong‑Tie^® structural connectors. This nail is available for both hand-drive and CCN64 Collated Connector Nailer.

Material

Carbon Steel

Finish

Hot-Dip Galvanised

Features & Benefits

Full round head with embossed size identification
Smooth shank makes for easier driving
Diamond Point provides lower driving resistance
Collated version with orange tips and 33° collation angle help with quick alignment through CCN64 Collated Connector Nailer
Paper tape strip, 22 nails per strip

Applications

Simpson Strong‑Tie^® Connectors

Model No. Table

Specifications - Hand Drive

Model No.	Guage	Size	Shank	Point	Head Type	Material & Finish	Box Qty
N8DHDG-R	#8	38mm x 3.32mm	Smooth	Diamond Point	Full Round	Hot-Dip Galvanised	150
N8D5HDG-R	#8	38mm x 3.32mm					750
N10DHDG-R	#10	38mm x 3.75mm					120
N10D5HDG-R		38mm x 3.75mm					600
10D5HDG-R		75mm x 3.75mm					250

Specifications - CCN64 Collated Connector Nailer

Model No.	Guage	Size	Shank	Point	Head Type	Material & Finish	Strip	Box Qty
These coated fasteners possess a level of corrosion resistance that makes them suitable for use in some exterior and corrosive environments and with some preservative-treated timber. For applications in higher-exposure applications, consider Type-300 series stainless-steel fasteners for superior corrosion resistance.
N8HDGPT500	#8	38mm x 3.32mm	Smooth	Diamond Point	Full Round	Hot-Dip Galvanised	33° Collation 22 nails per strip	500
N8HDGPT4000	#8	38mm x 3.32mm						4,000
N10HDGPT500	#10	38mm x 3.75mm						500
N10HDGPT3000		38mm x 3.75mm						3,000
N10DHDGPT500		64mm x 3.75mm						500
N10DHDGPT2500		64mm x 3.75mm						2,500

Here is the brand introduction content...