SCNR Ring-Shank Connector Nail Collated
Model: SCNR_Collated
{{ levelLabels[lvl] }}:
| {{ stock.company }} | Qty: {{ stock.total_quantity }} |
Strong‑Drive® connectors have been designed and tested with specific types of nails, which are generally referred to as Structural Connector Nails (SCN). The specified nail size, type and quantity must be installed in the correct holes of the connector or strap to achieve the published loads for the hardware. The dimensions and bending yield strength characteristics needed for nails used in Simpson Strong-Tie connectors.
The SCNR Ring-Shank Connector Nail has been developed as the optimum nail for connector products. Feature with "Rings" on the shank providing superior holding power. Choose this 316 Stainless Steel connector nail when using stainless steel connectors. It is the best choice for achieving maximum load values in Simpson Strong‑Tie® structural connectors. This nail is available for both hand-drive and CCN64 Collated Connector Nailer.
Material
316 Stainless Steel
Features & Benefits
- Full round head with embossed "≠" identifier
- Annular Threads or "rings" on the shank increase withdrawal capacity identification
- Diamond Point provides lower driving resistance
- Collated version with 33° collation angle help with quick alignment through CCN64 Collated Connector Nailer
- Paper tape strip, 22 nails per strip
Applications
- Simpson Strong‑Tie® Connectors
Model No. Table
Specifications - Hand Drive
|
Model No. |
Guage |
Size |
Shank |
Point |
Head Type |
Material & Finish |
Box Qty |
|
SSNA8D |
#8 |
38mm x 3.32mm |
Annular-Ring |
Diamond Point |
Full Round |
316 Stainless Steel |
150 |
|
SSNA10D |
#10 |
38mm x 3.75mm |
120 |
||||
|
SSNA10D5 |
600 |
||||||
|
SSA10DD |
#10 |
75mm x 3.75mm |
50 |
||||
|
SSA10D5 |
250 |
Specifications - CCN64 Collated Connector Nailer
|
Model No. |
Guage |
Size |
Shank |
Point |
Head Type |
Material & Finish |
Strip |
Box Qty |
|
These coated fasteners possess a level of corrosion resistance that makes them suitable for use in some exterior and corrosive environments and with some preservative-treated timber. |
||||||||
|
T10A150MCN |
#8 |
38mm x 3.32mm |
Annular-Ring |
Diamond Point |
Full Round |
316 Stainless Steel |
33° Collation |
1500 |
|
T9A150MCN |
#10 |
64mm x 3.75mm |
||||||
|
T9A250MCN |
1000 |
|||||||
Here is the brand introduction content...
Here are the parts content...