SDWH Timber-Hex Landscaping Screw
Model: SDWH
{{ levelLabels[lvl] }}:
| {{ stock.company }} | Qty: {{ stock.total_quantity }} |
Superior to nails in holding power and pullout resistance
The SDWH19 Timber-Hex screw is ideal for structural and general purpose timber frame applications where a hex-head drive is preferred.
The SDWH27 Timber-Hex screws are also available with an extra strong shank and have a Hot-Dip Galvanised finish for when you require a heavy duty fastener for tough exterior structural applications.
Material
Carbon Steel
Finish
- SDWH19 — Double Barrier Coating
- SDWH27 — CL4 Hot-Dip Galvanised
Features & Benefits
- Bold thread design provides superior holding power
- SawTooth™ point ensures fast starts, reduces installation torque
- Screws may be installed without pre-drilling in most applications
- Underhead nibs offer greater installer control when seating the head
- Hex Head Drive for easier installation
Applications
SDWH27
- Piles
- Decks
- Boardwalks
- Anywhere you need a tough exterior structural fastener
SDWH19
- Ledger boards
- Stud-to-stud
- Bottom plate to floor/joist
Model No. Table
|
Model No. |
Head Marking (##) |
Size |
Thread |
Point |
Material & Finish |
Box Qty |
Drive Size |
|
SDWH19400DB-R50 |
194 |
4.9 x 101mm |
Bold Threads |
SawTooth™ Type-17 Point |
Carbon Steel |
50 |
5/16” Hex |
|
SDWH19600DB-R50 |
196 |
4.9 x 152mm |
50 |
||||
|
SDWH27400GR30 |
2704 |
7.0 x 101mm |
Serrated Threads |
Carbon Steel |
30 |
3/8" Hex |
|
|
SDWH27600GR30 |
2706 |
7.0 x 152mm |
30 |
PLEASE NOTE:
Pre-drilling and countersink may be necessary at ends, butt joints, and on applications where denser material is used. Follow the board manufacturer's recommendation where applicable. WARNINGS: Always wear PPE during installation. Corrosive environments, exposure to water, salt air, or chemicals (including some wood preservatives) may cause early failure. Click here for Corrosion Information, Important Information & General Notes.
Here is the brand introduction content...
Here are the parts content...