SDWS16 Framing & Batten Screw
Model: SDWS16
{{ levelLabels[lvl] }}:
| {{ stock.company }} | Qty: {{ stock.total_quantity }} |
The SDWS16 screw is suitable for replacing nails in many framing applications where you are wanting a more secure and precise connection, especially if you require greater holding power and pullout resistance, it can also be easily removed if required.
The screw has a SawTooth™ point that makes for fast installations without predrilling, and its specially designed head countersinks easily to provide a clean, flush finish. The T-25 bit holds the 6-lobe recess tightly, reducing cam-out and head stripping.
Higher shear and withdrawal capacity than that of a No.14 Bugle Batten screw*
*Testing of SDWS16 into softwood (JD5) vs No14 screw capacities given in AS1720.1 – 2010.
Material
Carbon Steel
Finish
Quik Guard® Coating
Features & Benefits
- Large washer head with underhead box-nibs provides increased bearing in structural applications and provides clean and easy countersinking (11mm head dia.)
- SawTooth™ point ensures fast starts, reduces installation torque and eliminates the need for predrilling in most applications
- The 6-lobe drive provides positive bit engagement resulting in easier installations and longer bit life
Applications
- Multipurpose timber-to-timber connections, including timber framing, indoor/outdoor projects
- Batten Tie-Downs
- Beam Construction (laminating timber members for lintels and boundary joists etc.)
- Framing Connections
- Joist or Rafter Connections
- Purlin to Rafter/Truss Connections
- Timber Battens
- Fence Rails and Capping
Model No. Table
|
Model No. |
Size (Major Thread) |
Head Marking (##) |
Thread |
Point |
Material & Finish |
Box Qty |
Drive Size |
|
SDWS16212QR50 |
12G (5.5mm) x 64mm |
3.5 |
Serrated Threads |
SawTooth™ Type-17 Point |
Carbon Steel |
50 |
T-25, 6-lobe |
|
SDWS16212QR150 |
150 |
||||||
|
SDWS16300QR50 |
12G (5.5mm) x 76mm |
50 |
|||||
|
SDWS16300QR150 |
150 |
||||||
|
SDWS16312QR50 |
12G (5.5mm) x 89mm |
50 |
|||||
|
SDWS16312QR150 |
150 |
||||||
|
SDWS16400QR50 |
12G (5.5mm) x 102mm |
50 |
|||||
|
SDWS16400QR150 |
150 |
PLEASE NOTE:
Pre-drilling and countersink may be necessary at ends, butt joints, and on applications where denser material is used. Follow the board manufacturer's recommendation where applicable. WARNINGS: Always wear PPE during installation. Corrosive environments, exposure to water, salt air, or chemicals (including some wood preservatives) may cause early failure. Click here for Corrosion Information, Important Information & General Notes.
Alternative to NZS3604:2011
The Simpson Strong-Tie Strong-Drive SDWS16 and SDWS22 shank, major thread, and root diameter dimensions meet or exceed the 10g and 14g screw sizes in NZS3604:2011 for fixing Roof Battens and Purlins to rafters or trusses.
|
Fastener |
Description |
NZS3604* Capacities |
Simpson Strong-Tie equivalent screw size |
|
Gun Nail |
2 /90 x 3.15mm |
0.8 kN Fixing Capacity |
1 /SDWS16 x 89mm |
|
Screw |
1 /10g x 80mm |
2.4 kN Fixing Capacity |
1 /SDWS16 x 89mm |
|
Screw |
1 / 14g x 100mm |
5.5 kN Fixing Capacity |
1 /SDWS22 x 102mm |
*Table 10.10 of NZS3604:2011
Here is the brand introduction content...
Here are the parts content...