VT-HP High Performance Chemical Anchor
Model: VT-HP
{{ formattedPrice }} inc. GST
{{ productData.list_price }}
{{ levelLabels[lvl] }}:
| {{ stock.company }} | Qty: {{ stock.total_quantity }} |
SKU: {{ sku }}
UOM Qty: {{ uomQty }}
{{ quantity }} exceeds {{ totalQuantity }} in stock – will be backordered 这里要加backorder时长 从产品数据内取.
VT-HP® is a high-performance fast cure vinylester resin-based chemical anchor developed for anchoring applications in cracked and non-cracked concrete 20MPa to 50MPa and qualified for use in seismic regions (performance categories C1/C2).
Material
- Vinylester
Base Material
- Normal and Lightweight Concrete (cracked and non-cracked)
- Grout-filled and Hollow Concrete Block (when used with screen tubes)
- Certain un-reinforced masonry applications
Features & Benefits
- Suitable for use in cracked and non-cracked concrete M8 to M30 / rebar Ø8 to Ø32
- Qualified for use in seismic performance categories C1 and C2
- Low odour for safe use in confined spaces - VOC Compliant (A+ rating)
- Excellent for use in cold weather conditions or applications where fast cure is required
- Can be used in dry and damp conditions, wet or flooded environments (not sea water)
- Fire rated R120
- Fits 300ml standard caulking gun or DT300 by Simpson Strong-Tie, easy to dispense
Installation
Note: Refer to product label for hole and cartridge preparation, installation and technical data.
Applications
- Structural Steel
- Steel Columns and Beams, Post Bases, Concrete Columns
- Balcony Extensions
- Post-installed rebar applications
- Threaded Rod Anchoring
- Facades, Safety Barriers
- Fences, Gates, Industrial Garage and Warehouse applications
Approvals
- CE 1404 (meets EU safety, health or environmental requirements).
- ETA – 19/0419 (Threaded Rod and Rebar Concrete)
- ETA – 19/0765 (Threaded Rod Masonry)
- Fire Rated (R120)
- WRAS Approved Material (Approved for use with Potable drinking water* approval no. 1811567)
Model No. Table
|
Model No. |
Description |
Size |
Box Qty |
|
VT-HP300GREY |
Fast cure vinylester anchoring adhesive (with C1 and C2 ETA Approvals) (Includes 2 mixing nozzles — MN1) |
300ml |
12 |
|
DT300 |
Manual dispensing tool for 300ml cartridges. See product here. |
— |
1 |
|
MN1-RP10 |
Suit 300ml Epoxy Adhesives, Pack of 10. See product here. |
— |
10 |
Here is the brand introduction content...
Here are the parts content...