Hitools

WSCBG Cement Sheet / Underlay Screw (Collated)

Model: WSCBG

{{ formattedPrice }} inc. GST ~~{{ productData.list_price }}~~

Qty: {{ stock.total_quantity }}

SKU: {{ sku }}

UOM Qty: {{ uomQty }}

Quantity:

{{ quantity }} exceeds {{ totalQuantity }} in stock – will be backordered 这里要加backorder时长从产品数据内取.

The WSCBG underlay screw is designed for fast and secure underlayment to subfloor and wall installations. The WSCBGHLA114SA is designed for cement board-to-steel (0.55mm–0.75mm) applications with its Sharp Point and High-Low Threads design. Whereas the WSCBGA158SA with its Type-17 point and coarse thread is designed for cement board-to-timber applications.

Material

Carbon Steel

Finish

Class 3 Mechanically Galvanised

Features & Benefits

Ribbed Wafer Head for easier countersinking and greater pulldown
High-Low Threads for secure holding down of underlay to timber and steel frame (WSCBGHLA114SA)
Type-17 Point ideal for timber, composite, and thin steel applications (WSCBGA158SA)
#2 Undersize square drive
15 TPI (WSCBGHLA114SA)

Applications

Cement Sheet/Underlay to timber and steel (WSCBGHLA114SA)
Cement Sheet/Underlay to timber (WSCBGA158SA)
Bathroom wall underlay
Recommended steel thickness 0.55mm–0.75mm

Model No. Table

Model No.	Size	Thread	Point	Material & Finish	Box Qty	Drive Size	Replacement Bit
These coated fasteners possess a level of corrosion resistance that makes them suitable for use in some exterior and corrosive environments and with some preservative-treated timber. For applications in higher-exposure applications, consider Type-300 series stainless-steel fasteners for superior corrosion resistance. Bit(s) included with every box of screws. Pre-drilling and countersink may be necessary at ends, butt joints, and on applications where denser material is used. Follow board manufacturers recommendations where applicable.
WSCBGHLA114SA	8G x 32mm	Hi-Lo Threads	Sharp Point	Carbon Steel Class 3 Mechanically Galvanised	2000	#2 Undersize Square Drive	BIT2SU-RC10
WSCBGA158SA	8G x 42mm	Coarse Threads	Type-17 Point	Carbon Steel Class 3 Mechanically Galvanised	2000	#2 Undersize Square Drive	BIT2SU-RC10

Here is the brand introduction content...